Page 24 - Zip-NVR-Quick-Start-Guide

Setup
Easy-Fit IP
CCTV

Easy-Fit IP CCTV
Easy-Fit IP

CCTV
Easy-Fit IP CC
delete current users. On initial setup there will only
be the administrator account.

The User tab is where you go to change the
Admin password and username.

Under the Alarm tab you can set what effect an
alarm trigger has from triggering an alarm output,
or recording a specific channel, to sending an email.

The RS232 tab allows you to adjust NVR’s RS232
settings to the settings required by the connected
RS232 device.

The Exceptions tab allows you to set how exceptions
are handled such as a full HDD and video loss.

Settings which can be configured inside the
Setup menu:

• System Settings
• Network Settings
• User Accounts
• Alarm Inputs & Outputs
• RS232 Configuration
• Exception Handling
Easy-Fit IP
CCTV

Easy-Fit IP CCTV
Easy-Fit IP

CCTV
Easy-Fit IP CC
Setup Interface

Setup Submenu Overview

The Setup menu is where all major settings are configured from network
settings to user accounts.
In the General tab all of the basic device settings can be adjusted such as
system time/date, video format and daylight saving time.
The Network tab is where you will enter all network information like the IP
address, DDNS settings, switch mode and email settings for email notifications.
In the User tab, as the administrator you can create new accounts and choose
what permissions users have both locally and remotely. You can also edit and
it IP
CCTV

it IP CCTV
it IP

CCTV
it IP CC
24 Get more from your Zip NVR with our Free CCTV tips at ZipNVR.com