Page 31 - Zip-NVR-Quick-Start-Guide

How To - Set The Network Address Of Your NVR
Easy-Fit IP
CCTV

Easy-Fit IP CCTV
Easy-Fit IP

CCTV
Easy-Fit IP CC
1 Connect the LAN socket of the NVR to your router using 2 Enter the ‘Setup’ menu of the NVR. Select the ‘Network’
the blue patch cable supplied. tab on the left hand side.

Easy-Fit IP
CCTV

Easy-Fit IP CCTV
Easy-Fit IP

CCTV
Easy-Fit IP CC
Note: Do not use a crossover cable for the connection Ensure you have ‘Static’ selected.
to the router this is for direct connection to a PC.

3 Check the ‘IP Address’, ‘Subnet Mask’ and ‘Default 4 Make sure the NVR is now plugged into the network.
Gateway’ match the settings you chose on the previous Ping the NVRs IP address from the PC using the address
page ‘Select A Network Address For Your NVR’. Set the you have set in the NVR. This time you should get a
‘DNS1’ address to match the ‘Default Gateway’ and set the response showing a time in milliseconds. See step 4 in
‘DNS2’ address to ‘008.008.008.008’ then click ‘Save’. on the previous page.

it IP
CCTV

it IP CCTV
it IP

CCTV
it IP CC
The full instruction manual can be found on the CD which accompanied the NVR. 31