Page 15 - Zip-NVR-Quick-Start-Guide

Power Up & Shutdown
Easy-Fit IP
CCTV

Easy-Fit IP CCTV
Easy-Fit IP

CCTV
Easy-Fit IP CC
Proper startup and shutdown procedures are crucial for
extending the life of the device. The hard drive spins at
around 7000rpm, cutting power to the NVR stops the hard
drive instantly which can cause damage. When shut down
correctly the hard drive slows down gradually to prevent this.

Power Up

With the NVR plugged into the mains socket,
power the NVR using the switch on the rear.
The power LED on the front of the NVR should
show green indicating the device is getting power.

Shutdown

To power down the NVR, enter the ‘Turn Off’ menu. As
an added security feature you will be asked to enter your
username and password to prove you are attempting an
authorised shutdown. When entered you can then click ‘Turn
Off’ and the NVR will shutdown.
From the Turn Off menu you can also Logout or Reboot the NVR.

Prevent loss of your recorded footage caused by
power cuts by fitting a UPS with your NVR.
Easy-Fit IP
CCTV

Easy-Fit IP CCTV
Easy-Fit IP

CCTV
Easy-Fit IP CC
Shutdown Interface

Default Admin Password: 555555

New Password Reminder

If you decide to change the default password, please feel
free to use this box to write down a password reminder to
jog your memory.

it IP
CCTV

it IP CCTV
it IP

CCTV
it IP CC
The full instruction manual can be found on the CD which accompanied the NVR. 15