Page 52 - Zip-NVR-Quick-Start-Guide

PoE Extenders

In-line 1ch PoE Extender
Easy-Fit IP
CCTV

Easy-Fit IP CCTV
Easy-Fit IP

CCTV
Easy-Fit IP CC
Wall Mount 4ch PoE Extender

Easy-Fit IP
CCTV

Easy-Fit IP CCTV
Easy-Fit IP

CCTV
Easy-Fit IP CC
• Supports 10 & 100Mbps • Use 2 Units For 300m Runs • Supports 10 & 100Mbps • 22W Max Total Output
• 100m Max Input & Output • Can Be Used With Splitters • 100m Max Input & Output • 15W Max Per Channel

This small in-line device can extend a network cable run up A simple way to extend a network cable run and power up to four
to 300 metres. Requiring no additional power source it can IP CCTV cameras. A cable run of 100m can be extended a further
be installed in ceiling voids and cable ducts to create a longer 100m run to add and power up to four 8 Mega Pixel cameras.
cable run by simply connecting the RJ45 plugs in and out. The unit is easy to wall mount and no power or additional set
Each extender can be added to an existing 100m run to up is required. Suitable for use at the end of a network run as an
boost power and data for another 100m and two units can “end span” unit with additional switches before it in the run and
be used to achieve an overall 300m PoE network cable run. A can also be used with a PoE Splitter for a non-PoE camera.
single unit can also be used with a single PoE splitter (models The unit has a power input rated at 25.5W and can supply up to
POE001,002,003 on page 32) to power non PoE cameras over 22W overall output with a maximum of 15W on any one output.
longer network runs. Order Code: POE104
Order Code: POE100
it IP
CCTV

it IP CCTV
it IP

CCTV
it IP CC
52 Get more from your Zip NVR with our Free CCTV tips at ZipNVR.com