Page 51 - Zip-NVR-Quick-Start-Guide

PoE Splitters & Injectors
Easy-Fit IP
CCTV

Easy-Fit IP CCTV
Easy-Fit IP

CCTV
Easy-Fit IP CC
Wall Mount PoE Splitter PoE Injector

• Easy Fit, Click In DesignEasy-Fit IP
• Internal ConnectionsCCTV
• Supports 10 & 100Mbps
• Wall Mount DesignEasy-Fit IP CCTV
Easy-Fit IP
The POE003 isn’t just a wall
mount PoE splitter, its IP44 CCTV
rated ABS case protects the Easy-Fit IP CC
electronics inside making • Supports Up To 1000mbps • Up To 30W Output Power
it a great choice for use in
outbuildings or under porches. • 52V Output • 220V AC (PSU Supplied)
With a click-in removable
insert, simply connect the unit It may be on certain networks that are encountered, Power over
to the network with the RJ45 Ethernet is not available to supply power when adding IP CCTV
socket then connect your IP cameras. In this instance a useful addition is a PoE injector that
camera to the attached fly works by adding a power source into the network run.
lead using the 2.1mm DC plug The POE200 injector works as a mid or end span device after
and RJ45 plug. Then simply upper network switches and devices and before cameras
click the insert into the outer adding or injecting up to 30W of power into the Ethernet cable
wall mounted box for a neat allowing PoE cameras to be added to the run thereafter. Typical
installation. cable runs of 100m into the device and 100m out of the device
Order Code: POE003 are easily achievable on a standard 100Mbps network.
Order Code: POE200
it IP
CCTV

it IP CCTV
it IP

CCTV
it IP CC
The full instruction manual can be found on the CD which accompanied the NVR. 51