Page 41 - Zip-NVR-Quick-Start-Guide

How To - Install A 3.5” SATA Hard Drive
Easy-Fit IP
CCTV

Easy-Fit IP CCTV
Easy-Fit IP

CCTV
Easy-Fit IP CC
To record higher quality video, or to record for longer 2
periods of time, you may wish to add an extra hard drive to
your NVR. This process is a lot easier than you may think. Now connect the SATA cable to
After removing the top casing of the NVR just follow our the SATA socket on the hard drive.
quick step by step guide. Connect the other end to the SATA
Note: Zip NVRs are designed to house 3.5” SATA hard drives. socket on the PCB then place the drive in the NVR case.
3
See online tip 301 for a more in depth
guide to installing a 3.5 inch SATA hard

drive at ZipNVR.com
Easy-Fit IP301
CCTV
1
Easy-Fit IP CCTV
Easy-Fit IP

CCTV
Easy-Fit IP CC

Connect the power cable to the
power socket on the hard drive.
Connect the other end (White plug) to
the power socket on the PCB.
it IP
CCTV

it IP CCTV
it IP

CCTV
it IP CC
Screw through the holes in the base of the NVR or hard
drive shelf, and into the four fixing holes in the bottom
of the hard drive. (Screws supplied with hard drive.)

The full instruction manual can be found on the CD which accompanied the NVR. 41